Product Overview: It comes with an SFP+ 20-pin connectorfor hot-swappable functionality. The digitaldiagnostic function can be realizedthrough l2C. lt has a built-in dual clock andData Recovery (CDR)

Product Overview: The transceiver consists of two parts: a high-performance 1270nm DFB laser. Transmitter and high sensitivity PIN integrated with TIA. The receiver. The module is hot-swappable to a 20-pin connector. The high-speed electrical interface is based on low-voltage logic and has a nominal 100 ohm differential impedance and AC coupling in the module. Optical output can be disabled by TX_Disable LVTTL logical high level input. Signal loss (RX_LOS) output is used to indicate the loss of the receiver's input optical signal. The transceiver does not use the receiver RATE_SELECT pin. 2-wire interfaces (SCL, SDA) for serial ID, digital diagnostics, and other control/monitoring functions.

Product Overview: It is a very compact 10.3125Gb/s optical transceiver module for serial optical communication applications, supporting data rates of 10.3125Gbps (10GBASE-ZR) and transmission distances of up to 80 km on SMF.

Product Overview: The transceiver is a high-performance module for 2km multi-lane data communication and interconnect applications. It integrates eight data channels in each direction with a capacity of 8x26.5625GBd. Using the G.652 SMF with KP-FEC, each channel can operate at 53.125Gbps and transmit distances of up to 2 km. These modules are designed to operate on single-mode fiber systems using LAN-WDM 8 wavelengths. The electrical interface uses a 76 contact marginal connector. The optical interface uses a duplex LC connector.

Product Overview: Supports 100GBASE per channel in multimode fiber Hot swappable OSFP type external dimensions Data rate up to 425Gbps (4x 106.25Gbps) Up to 100m on MMF (OM4) 850nm VCSEL laser and PIN receiver High speed I/O electrical interface (400GAUI-4) Single MPO-12-APC socket type

Product Overview: Product Highlights 8x100G PAM4 re timed 800GAUI-8 electrical interface Provide dual MPO-12 APC connectors and MPO16 APC connectors 8-channel VCSEL array and 8-channel PIN photodetector array The maximum link length on OM3 is 60m, and the maximum link length on OM4 is 100m Hot swappable OSFP external dimensions Compliant with OSFP module specification Rev 5.0 Compliant with CMIS 5.2