Product Overview：
The transceiver consists of two parts: a high-performance 1270nm DFB laser. Transmitter and high sensitivity PIN integrated with TIA. The receiver.
The module is hot-swappable to a 20-pin connector. The high-speed electrical interface is based on low-voltage logic and has a nominal 100 ohm differential impedance and AC coupling in the module. Optical output can be disabled by TX_Disable LVTTL logical high level input. Signal loss (RX_LOS) output is used to indicate the loss of the receiver's input optical signal. The transceiver does not use the receiver RATE_SELECT pin.
2-wire interfaces (SCL, SDA) for serial ID, digital diagnostics, and other control/monitoring functions.
● Hot swap
● 10Gb/s serial optical interface
● CWDM DFB laser and PIN receiver
● 9/125um SMF transmission distance up to 10km
● SFP+ MSA package with duplex LC connector
● 2-wire interface for management and diagnostic monitoring
● SFI high-speed electrical interface
● Extremely low EMI and excellent ESD protection
● +3.3V single power supply
● Power consumption less than 1.0W
● Working shell temperature: -40~+85℃
